Table of Contents
Advertisement
Purpose of this manual
Related manuals
HDS-X5800
Manual Structure
This manual is the installation manual of Routing Switcher Processor HDS-X5800
and the optional boards.
This manual is intended for use by trained system and service engineers, and
describes the information on installing the HDS-X5800.
Besides this Installation Manual, the following manuals are prepared for HDS-
X5800 and the optional boards.
. . . . . Operation Manual (Supplied with HDS-X5800)
This manual describes the application and operation of HDS-X5800.
. . . . . System Setup Manual (Supplied with HDS-X5800)
This manual describes the software initialization or operation confirmation.
. . . . . e-Manual (Tentative name) (Available on request)
This electronic manual intended for use by trained system and service engineers
describes detailed parts list, block diagrams, schematic diagrams, and board layouts
required for parts-level service.
For obtaining, contact your local Sony Sales Office/Service Center.
. . . . . Protocol Manual (Available on request)
This manual describes the protocol for controlling this unit.
The manual below is provided for the protocol that this unit can support.
If this manual is required, please contact your local Sony Sales Office/Service Center.
S-BUS PROTOCOL AND COMMAND SPECIFICATIONS
(S-BUS remote terminal control protocol)
Part No.: 9-977-477-1X
. . . . . "Semiconductor Pin Assignments" CD-ROM (Available on request)
This "Semiconductor Pin Assignments" CD-ROM allows you to search for
semiconductors used in B&P Company equipment.
Semiconductors that cannot be searched for on this CD-ROM are listed in the
maintenance manual for the corresponding unit. The maintenance manual contains
a complete list of all semiconductors and their ID Nos., and thus should be used
together with the CD-ROM.
Part number: 9-968-546-XX
3 (E)
Advertisement
Table of Contents
