System Settings; Setting Items Of The Primary Station; A : Display Control Area; A : Display Unit Location - Sony BKS-R3202/R3210/R3220 Installation Manual

5-1. Setting Items of the Primary Station

A : DISPLAY CONTROL AREA

A : DISPLAY UNIT LOCATION

Purpose
The menu items [A : DISPLAY CONTROL AREA] and
[A : DISPLAY UNIT LOCATION] are used to check the
source and destination area of the whole routing system to
be controlled by the primary station.
Checking Procedure
1. Select menu item [A].
2. Control area is displayed as shown below.
Press [Ctrl] _ [E] to return to the menu screen.
DISPLAY CONTROL AREA
SOURCE No 0001-0512 DESTINATION No 0001-0512
The following table lists the control area and setting area
for each model.
Model Control Area
Input control Output control
area
DVS-RS1616 1 to 512
DVS-TC3232 1 to 512
BVS-V3232
BVS-A3232
DVS-V1616 1 to 512
DVS-V3232B
DVS-V6464B
DVS-A3232
BKPF-R70
HDS-V3232
n
The control area of the menu item [A] means the control
area of the whole routing system, and not the input/output
area of the primary station.
To set the source/destination location of the primary
station, call the secondary station menu screen by selecting
menu item [R] and type the station number [1], and then
select the menu item [A] of the secondary station.
ROUTING SWITCHER SYSTEM (E)
Section 5

System Settings

DVS-V6464B V2.10 STATION NUMBER 1
Ctrl-E:RETURN TO MENU
Mapping Area
Setting area
area
1 to 512 1 to 128
1 to 512 1 to 256
1 to 512 1 to 512
5-1