Menu Screen; Menu Screen Of The Primary Station - Sony BKS-R3202/R3210/R3220 Installation Manual

3-4. Menu Screen

3-4. Menu Screen

3-4-1. Menu screen of the primary station

The menu screen shows all menu items for system setting in the table data of the primary station.
By selecting the items on the menu screen using the following procedure, the screen will show the setting
screen.
n
Compared with the system status screen, router system operations take more time, when the menu screen
or the setting screen is open. Therefore, please return to the system status screen after system setting.
The following are two methods of selecting the menu items.
1. Use the cursor keys to select the desired menu item, and press [Enter]. (Some models have no this
function. In this case, perform step 2. to select.)
2. Press the alphabet key assigned to each menu item.
The screen will return to the system status screen when [Ctrl] _ [X] pressed.
Primary station menu screen of DVS-V3232B/V6464B, BKPF-R70 or HDS-V3232 is as follows.
SONY ROUTING SYSTEM SETUP MENU
MODIFICATION COMMAND
A: DISPLAY CONTROL AREA
C: SET DESTINATION NAME
E: SET LEVEL TABLE
G: UPDATE BACKUP CONTROLLER
J: NAME STYLE(Type + Num)
L: SET PHYSICAL ASSIGNMENT
N: SET DESCRIPTION NAME GROUP
P: CHANGE PASSWORD
R: CALL SECONDARY STATION
MAINTENANCE COMMAND
S: SELECT INDICATION COLOR(OFF)
U: SELECT CONTROL MODE
W: SYSTEM STATUS LOG
Y: DISPLAY TABLE DATA
Ctrl-X:QUIT SETUP MENU
n
. Menu screen of BKDF-R70 does not have the menu item [S].
. Menu screen of HDS-V3232 does not have the menu item [S] and [Y].
3-4
Model Software version
DVS-V6464B V2.10 STATION NUMBER 1
B: SET SOURCE/DEST TYPE
D: SET SOURCE NAME
F: SET ACTIVE UNIT NUMBER
H: SET GLOBAL PHANTOM
K: RESET TO DEFAULT TABLE
M: SET INHIBIT TABLE
O: SET TIE LINES
Q: CHANGE CROSSPOINT
T: SET CLOCK
V: SELECT WARNING DISPLAY (ON)
X: DISPLAY S-BUS COMMUNICATION
Z: SET UNIT DETECTABLE
Menu Screen of the Primary Station (Ex. DVS-V6464B)
Station address
Menu item
Short-cut key
ROUTING SWITCHER SYSTEM (E)