CipherLab RS51 Reference Manual page 208

RS51 Mobile Computer
Symbology
Enable App ID Separator
ISBT 128
ISBT 128
Concatenation
Discrete 25
Discrete 25
Discrete 25
Length option
Start Stop Selection
Verify Check Digit
Transmit Check Digit
Check to enable the separator configuration for
Application Identifier.
You can respectively set the Left Separator and Right
Separator. Tap on
between Keyboard input and Symbol table input to set a
separator character to replace with.
Switch to enable ISBT 128 decoding.
Sets whether to enable decoding ISBT 128 by performing
concatenation of ISBT data.

Disable: Does not perform concatenation

Enable: Performs concatenation on all ISBT-128 barcodes.

Auto-discriminate: Auto-discriminates between the ISBT 128
barcodes which require concatenation and those which do
not need concatenation.
Switch to enable Discrete 2 of 5 decoding.
Sets the length of the Discrete 2 of 5 symbols to decode.

One Fixed length (Length 1)

Two Fixed lengths (Length 1>Length 2)

Max / Min Length (range: 0-55; Length 1<Length 2)

Any Length
This decides the readability of all 2 of 5 symbology
Variants. For example, flight tickets actually use an
Industrial 2 of 5 barcode but with Interleaved 2 of 5
start/stop pattern. In order to read this barcode, the
start/stop pattern selection parameter of Industrial 2 of 5
should set to "Interleaved 25"

Discrete 25

Interleaved 25

Matrix 25
Decide whether to verify the check digit. If the check digit
is incorrect, the barcode will not be accepted.
Decide whether to include the check digit in the data to
transmit.
Description
to choose your input method
208
Default
Disable
Enable
Enable
Disable
Enable
Enable
Max / Min Length
(4-55)
Discrete 25
Disable
Enable