Pair With Nfc Enabled Bluetooth Devices; Share Information; Communication With Nfc - CipherLab RS51 Reference Manual

4.4.1. PAIR WITH NFC ENABLED BLUETOOTH DEVICES

1) On the device you would like to pair with, make sure
NFC is enabled and Bluetooth discovery is enabled.
2) Hold the mobile computer without covering the
antenna area at the lower end of the battery.
3) Move the mobile computer in proximity with the
device. A screen notification will appear to indicate
that pairing is successful.

4.4.2. SHARE INFORMATION

1) Open the web page, video, photo or contact info page you would like to transfer.
2) Place the back of the mobile computer in close proximity with the other device you would
like to share data with.
3)
When the two devices connect, a "Touch to beam" notification will appear on the
screen.
4) Touch the screen to initiate data transfer.
Note:
Once the data begins to transfer, just keep the two devices in the distance within 10 m (32.8 ft.);
they no longer have to be held within close range in order to transfer successfully.

4.4.3. COMMUNICATION WITH NFC

1) On the mobile computer, launch an NFC enabled application.
2)
Hold the mobile computer without covering the antenna area at the lower end of the
battery.
3)
Place the mobile computer close to the NFC tag or device until the application indicates
data transfer is complete.
147
Wireless Radios