Sam4s SER 7000 Operation Manual page 19

DISPLAY MESSAGES
NO TIME KEEP DATA IN HERE
An attempt to clear the employee time keeping data has been made from a register which is not set
within the service options to store the time clock data
MULTIPLICATION LIMIT EXCEED
The value entered is greater than the programmed multiplication maximum limit
TAB OF FIELD 2 TOO BIG
The value entered during the programming of non PLU's (price inclusive barcodes) is incorrect.
NON PLU CODE RANGE OVER
The program value entered during non PLU's (price inclusive barcodes) has been entered incorrectly
TARE ENTRY NOT ALLOWED
The attempt to enter the weight of packaging against a product is not allowed during the current
operation
MISC TEND REQUIRED
The miscellaneous tender function key is required as the next key sequence
SAME CHECK TRACK REQUIRED
The register allows the operation of four check tracking files, the opening and closing of the balance
should be carried out on the same check type function key. An attempt has been made to open a
balance using one check type function and closed on another.
NOT SCALEABLE PLU
Registration of a PLU not set as scalable has been made, the correct product type should be sold
EJ BUFFER FULL
The electronic journal memory of transactions, has reached the maximum limit set within the memory
allocation, the report should be reset.
MUST BE START<=END IN RANGE
When entering a range, the end of the range must be greater than the starting value
RANGE OVERLAP
The range entry for reporting or programming is incorrect.
FINAL END SHOULD BE 9 OR 99
The ending value has been entered incorrectly re-enter with either a 9 or 99
NOT PLU
The key selected for the sequence is the incorrect type, re-select a PLU key
NOT WLU
The key selected for the sequence is the incorrect type, re-select a WLU key
PRINT KEY REQUIRED
During registration the print key has been pressed in order to send none kitchen print items to the order
printer, press the Print key again to finalize the key sequence.
- 19 - SER-7000