Sony RS-232C Interface Manual page 16

CLIP/PROTECTION
Turning on/off of the CLIP and PROTECTION indicators of speaker output is indicated by the 8-bit data.
bit7 bit6
0 1
When the corresponding bit is '1', the indicator turns on. When the corresponding bit is '0', the indicator turns off.
Bit-2 to bit-7 are fixed all the time.
GATE
Operating status of the GATE of the automatic mixer block is indicated by the 8-bit data.
bit7 bit6
0 1
When the corresponding bit is '1', the GATE is in the close state (operating). When the corresponding bit is '0', the GATE is in the open
state.
Bit-6 and bit-7 are fixed all the time.
PARALLEL INPUT1-6
Presence or absence of input signal to the PARALLEL INPUT1 to 6 connectors on the rear panel of the SRP-X700P is indicated by the 8-bit
data.
bit7 bit6
0 1
When the corresponding bit is '1', input signal is present. When the corresponding bit is '0', input signal is absent.
Bit-6 and bit-7 are fixed all the time.
PARALLEL INPUT7-12
Presence or absence of input signal to the PARALLEL INPUT7 to 12 connectors on the rear panel of the SRP-X700P is indicated by the
8-bit data.
bit7 bit6
0 1
When the corresponding bit is '1', input signal is present. When the corresponding bit is '0', input signal is absent.
Bit-6 and bit-7 are fixed all the time.
PARALLEL OUTPUT1-6
Presence or absence of output signal at the PARALLEL OUTPUT1 to 6 connectors on the rear panel of the SRP-X700P is indicated by the 8-
bit data.
bit7 bit6
0 1
When the corresponding bit is '1', output signal is present. When the corresponding bit is '0', output signal is absent.
Bit-6 and bit-7 are fixed all the time.
bit5 bit4 bit3
0 0 0
bit5 bit4 bit3
MIC6/ MIC5/ MIC4
LINE2 LINE1
bit5 bit4 bit3
IN6 IN5 IN4
bit5 bit4 bit3
IN12 IN11 IN10
bit5 bit4 bit3
OUT6 OUT5 OUT4
bit2
PROTECTION
bit2 bit1
MIC3 MIC2/
WL2
bit2 bit1
IN3 IN2
bit2 bit1
IN9 IN8
bit2 bit1
OUT3 OUT2
– 16 –
bit1 bit0
CH2 CLIP CH1 CLIP
bit0
MIC1/
WL1
bit0
IN1
bit0
IN7
bit0
OUT1