Sony RS-232C Interface Manual page 14

Level meter value
The level meter values [dB] are indicated as shown below.
LEVEL
under -30 30[H] ('0')
-30 31[H] ('1')
-20 32[H] ('2')
-15 33[H] ('3')
-10 34[H] ('4')
-8 35[H] ('5')
-7 36[H] ('6')
-6 37[H] ('7')
-5 38[H] ('8')
MIC SWITCH
This command is used to display the status of the +48V switches of the MIC1/WL1 to MIC6/LINE2 by the 8-bit data.
bit7 bit6
0 1
When the corresponding bit is '1', the +48V switch is in the ON state. When the corresponding bit is '0', it is in the OFF state.
Bit-6 and bit-7 are fixed all the time.
WL RF
Turning on/off of the RF indicator of the wireless tuner that is installed in the SRP-X700P is indicated by the 8-bit data.
bit7 bit6
0 1
When the corresponding bit is '1', the RF indicator turns on. When the corresponding bit is '0', the RF indicator turns off.
Bit-2 to bit-7 are fixed all the time.
MIC OVER GAIN
Turning on/off of the OVER GAIN indicators of MIC1/WL1 to MIC6/LINE2 is indicated by the 8-bit data.
bit7 bit6
0 1
When the corresponding bit is '1', the OVER GAIN turns on. When the corresponding bit is '0', the OVER GAIN turns off.
Bit-6 and bit-7 are fixed all the time.
LINE INPUT OVER GAIN
Turning on/off of the OVER GAIN indicators of LINE3 and 4 is indicated by the 8-bit data.
bit7 bit6
0 1
When the corresponding bit is '1', the OVER GAIN turns on. When the corresponding bit is '0', the OVER GAIN turns off.
Bit-2 to bit-7 are fixed all the time.
LEVEL
-4 39[H] ('9')
-3 3A[H] (':')
-2 3B[H] (';')
-1 3C[H] ('<')
0 3D[H] ('=')
1 3E[H] ('>')
2 3F[H] ('?')
3 40[H] ('@')
bit5 bit4
MIC6/LINE2 MIC5/LINE1 MIC4
bit5 bit4
0 0
bit5 bit4
MIC6/ MIC5/
LINE2 LINE1
bit5 bit4
0 0
bit3 bit2
MIC3
bit3 bit2
0 0
bit3 bit2
MIC4 MIC3
bit3 bit2
0 0
– 14 –
bit1 bit0
MIC2/WL2 MIC1/WL1
bit1 bit0
WL2 WL1
RF RF
bit1 bit0
MIC2/ MIC1/
WL2 WL1
bit1 bit0
LINE4 LINE3