Sony RS-232C Interface Manual page 26

• LINE OUTPUT 1-6 ON/OFF (13th byte)
This command is used to turn ON/OFF the automatic mixer according to the output channels.
When you want to turn it ON, set the corresponding bit to 1. When you want to turn it OFF, set the corresponding bit to 0. Bit-6 and bit-7
are fixed all the time.
MSB
bit7 bit6
0 1
• LINE OUTPUT 7,8, RECOUT 1,2 ON/OFF (14th byte)
This command is used to turn ON/OFF the automatic mixer according to the output channels.
When you want to turn it ON, set the corresponding bit to 1. When you want to turn it OFF, set the corresponding bit to 0. Bit-4 to bit-7
are fixed all the time.
MSB
bit7 bit6
0 1
Example: When setting the respective parameters as shown below.
INPUT COMPRESSOR THRESHOLD
INPUT COMPRESSOR RATIO
INPUT COMPRESSOR ATTACK TIME
INPUT COMPRESSOR RELEASE TIME
INPUT GATE THRESHOLD
INPUT GATE HOLD TIME
INPUT GATE RELEASE TIME
OUTPUT LIMITER THRESHOLD
OUTPUT LIMITER ATTACK TIME
OUTPUT LIMITER RELEASE TIME
FUNCTION ON/OFF
MIC INPUT ON/OFF
LINE OUTPUT1-6 ON/OFF
LINE OUTPUT7-8, REC OUT 1,2 ON/OFF : Turn on LINE OUTPUT7, 8, and turn off REC OUT1, 2.
43[H] 41[H] 4D[H] 50[H] 59[H] 37[H] 3E[H] 41[H] 43[H] 47[H] 45[H] 66[H] 34[H] 41[H] 4C[H] 4F[H] 4F[H] 43[H] 0D[H]
('C A M P Y 7 > A C G E f 4 A L O O C CR')
bit5 bit4 bit3
OUT6 OUT5 OUT4
bit5 bit4 bit3
0 0 REC2
: –3 dB
: 4:1
: 33 ms
: 100 ms
: –25 dB
: 1000 ms
: 470 ms
: 10dB
: 0.47 ms
: 100 ms
: Set DEFAULT/EDIT to EDIT, turn on NOM, and turn off ONLY ONE and
LAST ON.
: Turn on MIC 1-4, and turn off MIC 5, 6.
: Turn on LINE OUTPUT1-4, and turn off LINE OUTPUT5, 6.
bit2 bit1
OUT3 OUT2
bit2 bit1
REC1 OUT8
– 26 –
LSB
bit0
OUT1
LSB
bit0
OUT7