Sony RS-232C Interface Manual page 58

SCENE RECALL BUTTON : 43[H] 52[H] 53[H] 41[H] ('CRSA')
This command is used to set the scene No. to be recalled, to the SCENE RECALL A to D buttons on the front of the SRP-X700P.
• Packet format
43[H] 52[H] 53[H] 41[H] "parameter" 0D[H]
• Parameter
The parameter consists of the 4 bytes all the time in the order as shown in the table below.
byte Parameter name
1st RECALL A SCENE No.
2nd RECALL B SCENE No.
3rd RECALL C SCENE No.
4th RECALL D SCENE No.
Method of specifying the scene No. is the same as that of the SCENE STORE command.
Example: When you want to set the respective buttons as shown below.
RECALL A
RECALL B
RECALL C
RECALL D
43[H] 52[H] 53[H] 41[H] 31[H] 32[H] 33[H] 34[H] 0D[H]
('C R S A 1 2 3 4 CR')
: Scene No.1
: Scene No.2
: Scene No.3
: Scene No.4
– 58 –