Sony RS-232C Interface Manual page 25

• INPUT GATE HOLD TIME (6th byte)
This command is used to set the hold time of the gate of the input channel.
The setup procedure is the same as the input compressor release time (the fourth byte).
• INPUT GATE RELEASE TIME (7th byte)
This command is used to set the release time of the gate of the input channel.
The setup procedure is the same as the input compressor release time (the fourth byte).
• OUTPUT LIMITER THRESHOLD (8th byte)
This command is used to set the threshold level of the limiter of the output channel.
LEVEL [dB]
0 5C[H] (' \ ')
+1 5D[H] (']')
+2 5E[H] ('^')
+3 5F[H] ('_')
+4 60[H] ('`')
+5 61[H] ('a')
+6 62[H] ('b')
• OUTPUT LIMITER ATTACK TIME (9th byte)
This command is used to set the attack time of the limiter of the output channel.
The setup procedure is the same as the input compressor attack time (the third byte).
• OUTPUT LIMITER RELEASE TIME (10th byte)
This command is used to set the release time of the limiter of the output channel.
The setup procedure is the same as the input compressor release time (the fourth byte).
• FUNCTION ON/OFF (11th byte)
Switches between DEFAULT/EDIT, and turns ON/OFF the respective functions NOM, ONLY ONE, and LAST.
When DEFAULT/EDIT is 1 (EDIT), the automatic mixer is activated with the parameter specified by this command. When it is 0
(DEFAULT), it operates with the default parameter value when shipped from the factory.
When you want to turn ON NOM, ONLY ONE, and LAST ON, set the corresponding bit to 1. When you want to turn them OFF, set the
corresponding bit to 0.
MSB
bit7 bit6
0 1
Caution
When DEFAULT/EDIT is set to 0 (DEFAULT), the settings of NOM, ONLY ONE, and LAST ON return to the default state when
shipped from the factory.
• MIC INPUT ON/OFF (12th byte)
This command is used to turn ON/OFF the automatic mixer according to the input channels.
When you want to turn it ON, set the corresponding bit to 1. When you want to turn it OFF, set the corresponding bit to 0. Bit-6 and bit-7
are fixed all the time.
MSB LSB
bit7 bit6
0 1
LEVEL [dB]
+7 63[H] ('c')
+8 64[H] ('d')
+9 65[H] ('e')
+10 66[H] ('f')
+11 67[H] ('g')
+12 68[H] ('h')
+13 69[H] ('i')
bit5 bit4 bit3
0 0 DEFAULT
/EDIT
bit5 bit4 bit3
MIC6 MIC5 MIC4
/LINE2 /LINE1
LEVEL [dB]
+14
+15
+16
+17
+18
+19
+20
bit2 bit1
NOM ONLY ONE LAST ON
bit2 bit1
MIC3 MIC2/WL2 MIC1/WL1
– 25 –
6A[H] ('j')
6B[H] ('k')
6C[H] ('l')
6D[H] ('m')
6E[H] ('n')
6F[H] ('o')
70[H] ('p')
LSB
bit0
bit0