Table of Contents
Advertisement
Necessary Setup Before
Using the Recorder
Some setups are necessary for the recorder
depending on the TV or other components to
be connected.
For details on using the setup display, see
page 40.
For details on each setup display item, see
page 40 to 45.
I To connect the recorder to a wide-screen
TV
In the setup display, set "TV ASPECT" in
"SETUP" to "16:9."
I To connect the recorder to a normal TV
In the setup display, set "TV Aspect" to "4:3
Letterbox" or "4:3 Panscan" in the setup
display. For details, see page 43.
I To listen to the sound through speakers
connected to an amplifier with a digital
connector or to output the sound to a
digital component such as a DAT or MD
deck
When you play a DVD, set "Digital Audio
Output" to "PCM" or "Stream/PCM" in the
setup display. For details, see page 45.
I To connect the recorder to an audio
component with a built-in Dolby Digital
decoder
In the setup display, "Digital Audio Output" to
"Dolby Digital/PCM".
Use the setup display to change the various
settings for the picture and sound.
For details, see page 40.
US
22
*RCD-W7V.p65_13-22
Selecting the Language
for On-Screen Display
You can select the language for the display
or the messages displayed on the screen.
Default setting is "ENGLISH."
DVD
DISPLAY
1
2
3
To cancel using the setup display on the way
Press RETURN.
Note
The languages you can select are the ones displayed
in step 2. For details, see page 41.
22
Press DVD DISPLAY and select
SETUP using X/x, and then press
ENTER.
SETUP
Select the Menu Language using
X/x, then press c.
English
Disc Audio
Spanish
Disc Subtitle
Disc Menu
French
Menu Language
R i
Select the language you want
using X/x, then press ENTER.
Anglais
Disque Audio
Espagnol
Sous Titre Du Disque
Menu De Disque
Langage Menu
Cl
t
12/9/01, 6:11 PM
RCD-W7V 4-236-407-11(1)
X/C/c/x
RETURN
ENTER
Advertisement
Table of Contents
