Sony RCD-W7V Operating Instructions Manual page 18

Connecting to a TV and an AV receiver equipped with a Dolby Digital or DTS decoder
: Signal flow
Amplifier (Receiver) equipped
with a Dolby Digital decoder
or DTS decoder
Front speaker (L)
Surround speaker (L)
Connect a
TV monitor
Amprifier with a digital output (optical) jack
z
When this recorder is connected an amplifier (receiver) equipped with Dolby Digital decoder
Set the "Digital Audio Output" of the setup menu to "DOLBY DIGITAL/PCM".
z
When this recorder is connected an amplifier (receiver) equipped with DTS decoder
Set the "Digital Audio Output" of the setup menu to "Stream/PCM".
Note
• When connecting an amplifier (receiver) not equipped with a Dolby Digital or DTS decoder using an optical
cord, do not select "DOLBY DIGITAL/PCM" or "Sream/PCM" in the "Digital Audio Output" of the setup
menu.
Merely attemping to play a DVD may cause a screeching noise which could be harmful to your ears and damage
the speakers. In such a case, be sure to select "PCM" in the "Digital Audio Output".
US
18
*RCD-W7V.p65_13-22
To VIDEO OUT
To DIGITAL OUT
To digital input
(optical)
Center speaker
18
TV
To video input
Compact Disc Recorder
To an AC outlet
Front speaker (R)
Surround speaker (R)
Subwoofer
To the
VIDEO OUT jack
DIGITAL OPTICAL OUT jack
12/9/01, 6:11 PM
RCD-W7V 4-236-407-11(1)
To an AC outlet