Erasing A Single Track Of Cd-Rw Disc; Erasing An Entire Cd-Rw Disc - Sony RCD-W7V Operating Instructions Manual

Erasing a single track of
CD-RW disc
You can erase one track on a CD-RW at a
time. This process starts with the last track
on the disc. Please note that before erasing a
track, you must unfinalize the disc. If the
disc is not unfinalized, follow the
instructions of "Unfinalizing a CD-RW
disc" (page 52).
1
Press the ERASE button.
The "LAST TR. ERASE" indicator
will begin to flash, and the PLAY,
PAUSE, and REC indicators light up
for about 8 seconds. Erasing enters in
standby mode.
2
H H while "LAST TR ERASE" H
Press H H
is flashing.
The last track erasing starts. During the last
track erasing, "LAST TR. ERASE" appears
in the display and the remaining time for
erasing the last track appears in the display.
When this process is finished, the total track
number and the total playing time appears in
the display.
Notes
• Once erasing process starts, you cannot stop in the
middle of the process.
• Do not turn off the recorder or disconnect the
recorder from the AC power source in the middle
of the erasing process.
*RCD-W7V.p65_46-53
Erasing an Entire CD-RW
disc
Erasing the entire contents of a CD-RW disc
is easy, and it does not matter whether the
disc has been unfinalized or not.
1
ERASE
2
Notes
• Once entire disc erasing process starts, you cannot
stop the erasing in the middle of the process.
• Do not turn off the recorder or disconnect the
recorder from the power source in the middle of the
erasing process.
53
ERASE
Press ERASE one time (for a
finalized disc) or twice (for
unfinalized disc) until "DISC
ERASE" appears in the front panel
display.
The "DISC ERASE" indicator will
begin to flash, and the PLAY, PAUSE,
and REC indicators light up for about
8 seconds.
Entire disc erasing enters in the
standby mode.
Press H H H H while "DISC ERASE" is H
flashing.
Entire disc erasing starts. During
erasing, "DISC ERASE" appears in
the front panel display and the
remaining time for entire disc erasing
appears in the display. When this
process is finished, "0 0:00" appears
in the display.
12/9/01, 6:10 PM
RCD-W7V 4-236-407-11(1)
US
53