Table of Contents
Advertisement
Additional Information
Error Message
The following table explains the error
messages that appear in the display.
CHECK DISC
, A record-related button has been pressed
when a finalized disc is in the DECK B.
, A record-related button has been pressed
when a standard CD is in the DECK B.
, An unplayable disc (CD-ROM, Video CD
etc.) is inserted.
DATA DISC
, A non-audio CD-ROM or a CD-Video disc
has been placed in the machine.
DISC ERROR
, An unfinalized disc has been placed in the
DECK A.
, A DVD disc has been placed in the DECK B .
, The disc is not seated properly.
, There is a problem with the disc.
DISC FULL
, There is not enough time left on the disc to
complete a planned recording.
ERROR
, The disc tray is not seated properly.
NO AUDIO
, A record-related button has been pressed
when a non-audio disc is in the DECK B.
CAN NOT COPY
, A recording is not possible due to the Serial
Copy Management System (SCMS).
UNLOCK
, There is not source for recording through
DIGITAL OPTICAL IN jack.
NO DISC
, No disc is inserted in the recorder.
*RCD-W7V.p65_55-Rear cover
System Limitations
"TOC" appears for a long time
If the inserted recordable CD-R/RW is brand new,
"TOC" appears in the front panel display longer than
for CD-R/RWs that have been used.
Limitations when recording over an
existing track
• The correct remaining recording time may not be
displayed.
• You may find it impossible to record over a track if
that track has been recorded over several times
already.
• The remaining recording time may be shortened
out of proportion to the total recorded time.
• Recording over a track to eliminate noise is not
recommended since this may shorten the duration
of the track.
• You may find it impossible to label a track after
recording over a previous one.
• You can record songs for up to 99 tracks.
55
12/9/01, 6:09 PM
RCD-W7V 4-236-407-11(1)
US
55
Advertisement
Table of Contents
