Table of Contents
Advertisement
Unfinalizing a CD-RW disc
A CD-RW disc is both recordable and
rewritable. However, the process of
rewriting or erasing is different from of
cassette tapes.
Unfinalizing a CD-RW disc
A finalized CD-RW is neither recordable nor
rewritable. If you want to add new tracks or
erase single tracks, you must first unfinalize
the disc.
When using the remote, set DECK A/B
switch to DECK B for operations on DECK
B.
1
Press the ERASE button twice.
The "UNFINALIZE" indicator begins
to flash, and the PLAY, PAUSE, and
REC indicators light up for about 8
seconds.
Unfinalizing enters standby mode.
US
52
*RCD-W7V.p65_46-53
2
Notes
• The TOC (red) indicator appears on the front panel
display if the disc you put in DECK B has not been
finalized. Check the indicator each time before
unfinalizing.
• Once the unfinalizing process starts, you cannot
stop in the middle of the process.
• Do not turn off the recorder or disconnect the
recorder from the AC power source in the middle
of the unfinalizing process.
• A unfinalized discs can be played back only in
DECK B.
ERASE
ERASE
52
Press H
H
H while the "UNFINALIZE"
H
H
indicator is flashing.
Unfinalizing starts. During
unfinalizing, "TOC ERASE" appears
in the display and the remaining time
for unfinalizing appears in the display.
When the unfinalizing process is
finished, the total track number and the
total playing time appears in the
display and the TOC (red) indicator
lights up.
12/9/01, 6:10 PM
RCD-W7V 4-236-407-11(1)
Advertisement
Table of Contents
