Table of Contents
Advertisement
Display
Calibrate
Control Menu
The Control Menu (see the fig-
ure to the right) is accessed by
touching the Control key at the
bottom of the touch screen. A
brief description of each control
command is provided in the
table below.
NOTE: Most
of the com-
mands shown
are not avail-
able during an
active experi-
ment.
Select the desired function either from the drop-down list of Control Commands or by pressing the icon. Then
press Apply to initiate the action.
Control Command
LID OPEN/CLOSED
RESET
AUTOSAMPLER
UNLOAD
LOAD
(table continued)
DSC Q Series Getting Started Guide
Accesses the display screen, which displays the signals from the
instrument such as signal display, real-time plot, instrument infor-
mation, etc.
Displays the calibration functions available for this instrument.
Functions such as Autosampler and touch screen calibration can
be accessed using this key.
Q2000/Q200 Control Menu
Description
Toggles between opening and closing the AutoLid on the cell.
Clears all commands, instructs the unit to locate all home
positions, and returns the Autosampler to the park position. Also
instructs the Autosampler to "forget" the current lid and sample
pan locations.
Unloads the pan from the cell to the Autosampler tray or waste bin.
Loads the selected pan from the Autosampler tray to the cell.
Lid Open/Closed
Reset Autosampler
Load
Unload
Air Cool
Switch Gas
19
Advertisement
Table of Contents
