Table of Contents
Advertisement
1. GENERAL INFORMATION
1.1. Application
The DRAGON (HS) is a cutting carriage designed to cut steel by using oxy-fuel or
plasma torches with the handle diameter of 28–35 mm (1.10–1.38''). The carriage
travels horizontally on the workpiece or track with the inclination of up to 10°.
Accessories allow, for example, using torches with different handle diameters,
using two torches simultaneously, and cutting holes with the radius of 240–2500 mm
(0.8–8.2 ft).
1.2. Technical data
Copying, using, or distributing without permission of PROMOTECH is prohibited.
473 mm (18.6'')
This document is protected by copyrights.
3
DRAGON (HS)
Advertisement
Table of Contents
