General Information; Application; Technical Data - Promotech BM-16 Operator's Manual

1. GENERAL INFORMATION

1.1. Application

The BM-16 is a bevelling machine designed to mill edges of plates and pipes made
of steel, aluminum alloys, brass, or plastics.
Depending on the milling head used the machine allows bevelling workpieces
with a thickness of at least 1.5 mm (0.06'') at the angle of 20°, 22.5°, 27.5°, 30°, 37.5°,
40°, 45°, 50°, 55°, 60°, or 65° to the maximum bevel width of 16 mm (0.63''). A radius
milling head allows bevelling with a radius of 2, 3, 4, or 5 mm. The minimum diameter
of a hole to be machined is 40 mm (1.57'').
An optional guide allows bevelling pipes, sticker protects aluminum workpieces
against scratches, and worktable fixture allows bevelling small workpieces.

1.2. Technical data

Voltage
Power
Rotational speed (without load)
Protection level
Protection class
Maximum bevel width (b)
Bevel angle (ß, depends on the
milling head used)
Minimum workpiece thickness for bevelling
Minimum hole diameter
Edge radius
Noise level
Vibration level
Required ambient temperature
Weight (without milling head)
Copying, using, or distributing without permission of PROMOTECH is prohibited.
Fig. 1. Bevel dimensions
This document is protected by copyrights.
3
1~ 220–240 V, 50–60 Hz
1~ 110–120 V, 50–60 Hz
2200 W
1800–5850 rpm
IP 20
II
16 mm (0.63'', Fig. 1)
20°, 22.5°, 27.5°, 30°, 37.5°, 40°, 45°,
50°, 55°, 60°, 65° (Fig. 1)
1.5 mm (0.06'')
40 mm (1.57'')
2 mm, 3 mm, 4 mm, 5 mm (Fig. 1)
More than 70 dB
2 2
2.3 m/s (7.5 ft/s )
Machine harmful for health. Take
periodic breaks during operation.
0–40°C (34–104°F)
10 kg (22 lbs)
BM-16