Cable Anchor; Torch Holder; Standard Torch Holder - Promotech DRAGON Operator's Manual

5.5. Cable anchor

Anchors gas cables and power cord to relieve stress for the torch holder. Install the
anchor to the side wall with the 5 mm hex wrench and two M6x30 screws.
Part number:
PDT-0475-34-00-00-0

5.6. Torch holder

5.6.1. Standard torch holder

Designed for torches with the handle diameter of 28–35 mm (1.10–1.38'') and allows
rough adjustment of the torch angle.
Part number:
UCW-0475-28-00-00-0
Copying, using, or distributing without permission of PROMOTECH is prohibited.
This document is protected by copyrights.
16
DRAGON (HS)