Table of Contents
Advertisement
Voltage
Power
Operating position
Torch diameter
Ground clearance
Speed
Weight
1.3. Design
The DRAGON (HS) cutting carriage contains a drive system, a controller, a rack,
a counterweight, and a standard torch holder. The drive system incorporates a
gear-motor that drives two steel wheels.
Standard torch holder
Rack
Rack position knob
Carrying handle
Copying, using, or distributing without permission of PROMOTECH is prohibited.
DRAGON
1~ 115–230 V, 50–60 Hz
20 W
horizontal
28–35 mm (1.10–1.38'')
8 mm (0.31'')
0–150 cm/min (0–59 in/min)
16.8 kg (37 lbs)
Speed adjustment knob
Travel direction switch
(Forward / O / Backward)
Rack locking levers
Clutch
Fig. 1. View of the DRAGON (HS)
This document is protected by copyrights.
4
DRAGON HS
1~ 115–230 V, 50–60 Hz
20 W
horizontal
28–35 mm (1.10–1.38'')
8 mm (0.31'')
10–300 cm/min (4–118 in/min)
16.8 kg (37 lbs)
LED display
Counterweight
DRAGON (HS)
Power switch
Advertisement
Table of Contents
