5. ACCESSORIES
5.1. Track
Increases the cutting precision by forcing straight-line motion of the carriage. The
length of a single rail is 1800 mm (70.9'') and the V-groove centerline is 152 mm (6'').
To connect two rails, use the 4 mm hex wrench, connecting plate, M5x6 screws, and
5.3 mm washers as shown in the figure below.
Part number:
TRO-0475-13-00-00-0
Copying, using, or distributing without permission of PROMOTECH is prohibited.
This document is protected by copyrights.
13
DRAGON (HS)