Precise Machine Torch Holder (For Oxy-Fuel Cutting); Sliding Holder - Promotech DRAGON Operator's Manual

5.6.4. Precise machine torch holder (for oxy-fuel cutting)

Designed for torches with the handle diameter of 30 mm (1.18'') or 35 mm (1.38'')
equipped with a rack. It allows adjustment of the vertical position of the torch by using
the knob and precise adjustment of the angle.
Part number (30 mm):
UCW-0475-59-00-00-0
Part number (35 mm):
UCW-0475-42-00-00-1

5.7. Sliding holder

Designed to be combined with other holders, which enables use of a second torch
independently of the standard torch.
Part number:
UCW-0475-15-00-00-1
Copying, using, or distributing without permission of PROMOTECH is prohibited.
This document is protected by copyrights.
18
DRAGON (HS)
Bracket