5.3. 2.6 kg (5.7 lbs) counterweight
Provides balance when using additional holders, 1000 mm (39'') rack, or heavier torch.
To remove the counterweight, use the 3 mm hex wrench to loosen the set screw.
Install in reverse order.
Part number:
PWG-0475-10-00-00-0
5.4. Roller support
Provides balance when using the 1000 mm (39'') rack or a heavier torch.
Part number:
PDT-0475-26-00-00-0
To install, loosen the handle of the torch holder and remove the holder. Then, place the
support onto the rack, secure with the handle, and reinstall the holder.
Copying, using, or distributing without permission of PROMOTECH is prohibited.
This document is protected by copyrights.
15
DRAGON (HS)