System Overview - Shure MXA910 Manual

• Compatible with Shure SystemOn audio asset management software for remote monitoring and real­time alerts about crit­
ical issues
Network Connectivity
• Discrete audio channels for each lobe and an automix channel are delivered over a single network cable
• Dante digital audio coexists safely on the same network as IT and control data, or can be configured to use a dedicated
network
• Control strings available for third-party preset controllers including Crestron and AMX
Professional Design
• Sleek industrial design blends with contemporary board rooms and meeting spaces
• Versatile mounting options for ceilings, pole mounts, suspension cables, and more
• Available in white, black, and aluminum finishes (detachable grille can be custom painted)

System Overview

① Dante audio, power, and control
Each array microphone connects to the network over a single network cable, which carries Dante audio, Power over Ether­
net (PoE), and control information to adjust coverage, audio levels, and processing.
② Analog audio (microphone to network)
Analog equipment, such as a wireless microphone system or a gooseneck microphone on a podium, connects to the Dante
audio network through a Shure Network Interface (model ANI4IN) for a completely networked conferencing system.
③ Far-end audio (network to loudspeakers)
Dante­enabled loudspeakers and amplifiers connect directly to a network switch. Analog loudspeakers and amplifiers con­
nect through a Shure Network Interface (model ANI4OUT), which converts Dante audio channels into analog signals, deliv­
ered through 4 discrete XLR or block connector outputs.
④ Device control and Dante audio
Shure Incorporated
6/59