Shure MXA910 Manual page 26

Shure Incorporated
Using the Adapter (625 mm Grid Size)
For ceiling grids which measure 625 x 625 mm, attach the adapter to the array microphone and then follow the mounting in­
structions.
Note: Only for use with the 60 x 60 cm model.
Screw the adapter pieces on as shown, using 2 screws per side.
Attaching the Safety Tether
Attach a safety tether between the building structure and one of the tie-off points on the back panel of the microphone. This
safety measure prevents the microphone from falling in an emergency situation. Make sure there is no tension on the safety
tether to ensure the microphone is resting properly in the ceiling grid.
Important: Follow local regulations when attaching the safety tether.
26/59