Table of Contents
Advertisement
Rubber Scratch Protectors
Optional: Before installing the microphone in the ceiling, attach the included rubber pads on the corners of the microphone to
prevent scratching.
Installation
1.
Make space in the ceiling grid for the array microphone to be installed.
2.
Run the Ethernet cable above the ceiling grid and through the opening in the ceiling.
Note: An optional junction box accessory (model A910-JB) mounts on the microphone to directly connect conduit.
3.
Plug the Ethernet cable into the array microphone output.
4.
Install the microphone into the ceiling grid.
Shure Incorporated
24/59
Hide quick links:
Advertisement
Table of Contents
