Table of Contents
Advertisement
(1.4 - 1.5) Removing screws and detaching one side of the frame
Step 2: Masking and Painting
1.
Use masking tape to cover the entire extrusion that runs along the inside of the frame. This ensures that the necessary
metal pieces make contact when reassembled.
2.
Use masking tape to cover the hook-and-loop fastener strips on the grille.
3.
Paint the frame and grille section and allow it to completely dry before reassembling. Do not paint any part of the main
assembly.
Step 3: Reassembly
1.
Secure the foam piece with the hook-and-loop fastener strips around the edges.
2.
Slide the grille back into the frame.
3.
Attach the remaining side of the frame and secure it with the 4 screws.
4.
Attach the LED lightpipe into the black plastic guide piece.
5.
Align the LED with the lightpipe and put the assembly back in place on the frame.
(2.1) Masking off the extrusion (highlighted in black)
Shure Incorporated
29/59
Hide quick links:
Advertisement
Table of Contents
