Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or electrical shock.
WARMING DRAWER ELEMENT
WARNING
Electrical Shock Hazard
Refer to page 4-19 for the procedure for servic-
ing the warming drawer element.
1.
Unplug range or disconnect power.
2.
Disconnect one of the wires from the warm-
ing drawer element terminals.
3.
Set the ohmmeter to the R x 1 scale.
4.
Touch the ohmmeter test leads to the warm-
ing drawer element terminals. The meter
should indicate between 11 and 23 Ω.
5-8