Removing The Control & Cooling Fan Thermal Switches And The Door Latch Assembly - KitchenAid KESI901PBL Technical Education

REMOVING THE CONTROL & COOLING FAN THERMAL
SWITCHES, AND THE DOOR LATCH ASSEMBLY
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
1. Unplug range or disconnect power.
2. Remove the control panel and rotate it
forward (see page 4-2, steps 2a through
2d for the procedure).
Control Thermal Switch
Door Latch Assembly
3 . To remove a thermal switch:
a) Remove the wires from the terminals.
b) Remove the mounting screws.
Control Or Cooling Fan Thermal Switch
Cooling Fan Thermal Switch
4. To remove the door latch assembly:
a) Open the oven door and remove the two
front mounting screws from the air vent.
Front Door Latch Screws
b) Remove the two top screws from the
door latch assembly bracket.
Top Door Latch Screws
c) Pull the door latch assembly forward as
far as it will go, and disconnect the
wires from the terminals of the two
switches and the motor.
d) Remove the door latch assembly from
the unit.
Door Switch
(Gray & Yellow)
4-6
Motor White Brown
Latch Switch
(Gray & Blue)