Programming
You can programme certain settings on
the cooktop to suit your personal
needs. Several settings can be changed
in succession.
After accessing programming mode,
the symbol and will appear in the
timer display. After a few seconds, :
(Programme 01) will flash alternately
with : (Code) in the timer display.
46
Calling up programming
With the cooktop switched off,
touch the and sensors at the
same time until the symbol and
appear in the timer display.
Setting a programme
Touch the sensor repeatedly until
the programme number you want
appears, or touch the appropriate
number sensor.
For a two digit programme number
you need to first set the tens position
using the number sensors.
Setting the code
Touch the sensor repeatedly until
the code you want appears in the
display or touch the appropriate
number sensor.
How to save the settings
While the programme is visible in the
display (e.g. :) touch the sensor
until the indicators go out.
How to avoid saving the
settings
Touch the sensor until the
displays go out.