Additional functions
Stop&Go
When Stop&Go is activated, the power
level of all cooking zones in use is
reduced to power level 1.
The cooking zone power levels and the
timer settings cannot be altered and the
cooktop can only be switched off. A set
minute minder duration, set automatic
switch-off and Auto heat-up times will
continue to count down.
When Stop&Go is deactivated, the
cooking zones will operate at the power
or frying levels previously selected.
If the function is not deactivated within
1 hour, the cooktop will switch off.
Activation / Deactivation
Touch the sensor.
40
Recall
If the cooktop is switched off in error
during operation, this function can be
used to reset all settings to the way
they were. For this to work, the cooktop
must be switched on again within
10 seconds of being switched off.
Switch the cooktop on again.
The power or frying levels previously set
will flash.
Touch the flashing power or frying
levels immediately.
All the cooking zones and the timer will
continue to operate using the settings
selected previously.