Programming - Miele KM 7678 FR Operating And Installation Instructions

You can adapt the programming of the
cooktop to your personal needs.
Several settings can be altered in
succession.
After accessing programming mode,
the  symbol appears and  will
appear in the timer display. After a few
seconds : (Programme 01) will flash
alternately with : (Code) in the timer
display.
Changing the programming
Calling up programming
The  sensor is located approx.
1 cm (index finger width) to the left of
the  sensor.
 With the cooktop switched off,
press and hold the  and  sensor
controls together until the  symbol
lights up and  appears in the timer
display.
Setting a programme
For a two-digit programme number
you need to first set the tens position.
 Whilst the programme is visible in the
display (e.g. :), touch
the  sensor repeatedly until the
number for the programme you want
appears in the display or touch the
appropriate number on the numerical
keybank.
Setting the code
 While the code is visible in the display
(e.g. :), touch the  sensor
repeatedly until the number for the
code you want appears in the display
or touch the appropriate number on
the numerical keybank.
How to save the settings
 While the programme is visible in the
display (e.g. :), touch the 
sensor control until the indicators go
out.
How to avoid saving the settings
 While the code is visible in the display
(e.g. :), touch the  sensor until
the indicators go out.

Programming

43