If you want to
– sign on your cooktop to the
Miele@home system, you will need
to first prepare the signing on
procedure on the master (display)
appliance.
– sign on your cooktop to the
Con@ctivity system, you will first
need to sign on the rangehood.
Calling up programming
With the cooktop switched off,
touch the and sensors at the
same time until the symbol and
appear in the timer display.
After a few seconds : (Programme
01) will flash alternately with :
(Code) in the timer display.
Signing on the cooktop
While : is visible in the display,
touch the sensor repeatedly
until : (Programme P:10) appears.
: appears in the display.
Touch the sensor repeatedly
until : appears in the display.
The signing on process will begin and a
scrolling bar will appear in the display.
The signing on process takes a few
minutes. As soon as it is completed
successfully, : will light up in the
display.
If the signing on process is not
completed successfully, repeat the
process.
While : is visible in the display,
touch the sensor until the
indicators go out to save the setting.
Finish signing on the rangehood/
master appliance (see the relevant
instructions).
Signing off the cooktop
If you would like to sign off the
cooktop from Miele@home, first carry
out the signing-off procedure on the
master (display) appliance.
While : is visible in the display,
touch the sensor repeatedly
until : (Programme P:10) appears.
: appears in the display.
Touch the sensor repeatedly
until : appears in the display.
The signing off process will begin and a
scrolling bar will appear in the display.
The signing off process takes a few
minutes. As soon as it is completed
successfully, : will appear in the
display.
If the signing off process is not
completed successfully, repeat the
process.
While : is visible in the display,
touch the sensor until the
indicators go out to save the setting.
Con@ctivity
57