Timer
The timer can be used for the following
2 functions:
- For setting the minute minder
- For automatically switching a cooking
zone off
You can use the functions
simultaneously.
Minute minder
You can set a minute minder for
activities that are unrelated to the
cooktop.
Automatic switch-off
You can set a time after which the
cooking zone will switch off
automatically. This function can be
used on all zones at the same time.
System lock
If the system lock is activated, the
cooktop cannot be switched on.
Safety lock
The safety lock is activated while the
cooktop is switched on. When the
safety lock is activated, the cooktop
can only be operated to a limited
extent.
Recall
If the cooktop is switched off
inadvertently during operation, this
function can be used to reset all
settings. For this to work, the cooktop
must be switched on again within
10 seconds of being switched off.
Familiarising yourself with the appliance
Keeping warm
This function enables food to be kept
warm directly after cooking.
The maximum duration for keeping food
warm is 2 hours.
Programming
You can adapt the programming of the
cooktop to your personal needs.
Demonstration mode
This function enables the cooktop to be
demonstrated in showrooms without
heating up.
Residual heat indicator
If a cooking zone is still hot, the residual
heat indicator will light up after it has
been switched off.
The bars of the residual heat indicator
go out one after the other as the
cooking zone cools down. The last
horizontal bar only goes out when the
cooking zone is safe to touch.
29