Related Manuals for Miele KM 6320
Summary of Contents for Miele KM 6320
-
Page 1: Induction Cooktop
Operating and Installation Instructions Induction Cooktop To prevent accidents and machine damage, read these instructions be‐ fore installation or use. en-US M.-Nr. 09 888 600... -
Page 2: Table Of Contents
Contents IMPORTANT SAFETY INSTRUCTIONS..............4 Overview ....................... 15 Cooktop ......................... 15 DirectSelection controls..................16 Cooking zone data....................18 Before using for the first time................19 Cleaning the cooktop for the first time ..............19 Turning on the cooktop for the first time..............19 Induction ....................... - Page 3 Contents Cleaning and care ....................39 Programming......................41 Frequently asked questions ................44 Con@ctivity ......................48 IMPORTANT SAFETY INSTRUCTIONS - INSTALLATION ........49 Safety clearances....................50 Ventilation ......................54 Instructions for installation ................. 55 Installation dimensions..................56 Installation ......................57 Electrical connection ...................
-
Page 4: Important Safety Instructions
They contain important notes on installation, safety, use and maintenance. Miele cannot be held liable for damage occurring as a result of non-compliance with these instructions. Keep these instructions in a safe place and pass them on to any... - Page 5 IMPORTANT SAFETY INSTRUCTIONS This cooktop is intended for domestic use and use in other similar environments. This cooktop is not intended for outdoor use. The cooktop is intended for domestic use only to prepare food and keep it warm. Any other use may be dangerous. ...
- Page 6 IMPORTANT SAFETY INSTRUCTIONS Children As with any other appliance, children must be supervised. Do not leave children unattended: Children should not be alone or unsupervised in the area where the appliance is installed. Do not al‐ low them to sit or stand on the appliance. ...
- Page 7 Technical safety Installation, repair and maintenance work should be performed by a Miele authorized service technician in accordance with national and local safety regulations and the provided installation instruc‐ tions. Contact Miele’s Technical Service Department for examina‐ tion, repair or adjustment. Repairs and other work by unauthorized persons could be dangerous and may void the warranty.
- Page 8 If the power cord is damaged, it must be replaced by a qualified electrician with a special power cord, which is available from Miele Service. See "Electrical connection." The appliance must be completely disconnected from the elec‐...
- Page 9 Disconnect the cooktop from the power supply and contact Miele. If the cooktop is installed behind a cabinet door, do not close the door while the cooktop is in operation.
- Page 10 IMPORTANT SAFETY INSTRUCTIONS Proper use The cooktop gets hot when in use and remains hot for a while af‐ ter being turned off. There is a potential hazard until the residual heat indicator goes out. When in use, the cooktop emits a significant amount of heat, which can cause objects in the vicinity to catch fire.
- Page 11 IMPORTANT SAFETY INSTRUCTIONS If the cooktop is covered, there is a risk that the material of the cover will ignite, explode or melt if the range is still hot or if turned on inadvertently. Never cover the cooktop with a board, cloth or protec‐ tive sheet.
- Page 12 IMPORTANT SAFETY INSTRUCTIONS Do not allow solid or liquid sugar, or pieces of plastic or aluminum foil to get onto the burners when they are hot, as they can damage the ceramic surface when it cools down. If this should occur, turn off the appliance and scrape off all the sugar, plastic or aluminum resi‐...
- Page 13 IMPORTANT SAFETY INSTRUCTIONS Metal utensils stored in a drawer under the cooktop can become hot if the appliance is used intensively for a long time. Do not store any metal items or utensils in a drawer under the cooktop. ...
- Page 14 IMPORTANT SAFETY INSTRUCTIONS Cleaning and care Do not use a steam cleaner to clean the cooktop. The steam may reach electrical components and cause a short cir‐ cuit. If the cooktop is built in over a self cleaning oven, the cooktop should not be used while the self cleaning process is being carried out, as this could trigger the overheating protection mechanism on the cooktop (see relevant section).
-
Page 15: Overview
Overview Cooktop a Cooking zone with TwinBooster b PowerFlex cooking zone with TwinBooster c PowerFlex cooking zone with TwinBooster bc can be combined to form PowerFlex cooking area d DirectSelection controls... -
Page 16: Directselection Controls
Overview DirectSelection controls Sensor buttons a Turning the cooktop On/Off b Control scale - Selecting the power setting - Setting the timer times c Activating and deactivating the System lock/Safety lock d Turning the booster/TwinBooster On/Off e Selecting the cooking zone f Turning the PowerFlex area On/Off... - Page 17 Overview g Timer - Turning On/Off - Switching between timer functions - Selecting a burning (see "Turning a cooking zone off automatically") h Activating/deactivating the Stop & Go function Indicator lights i System lock/Safety lock activated j Booster/TwinBooster activated l Indicator light for Auto Heat-up or increased number of power levels (see "Pro‐ gramming") m Indicator light for cooking zone selection, e.g., right rear zone k Cooking zone indicator...
-
Page 18: Cooking Zone Data
Overview Cooking zone data Cooking Output in watt** Diameter* Ø zone Inches Centimeters 208 V 240 V 7 – 11 18 – 28 Normal 2200 2500 TwinBooster, Level 1 2700 3100 TwinBooster, Level 2 3350 3850 6 – 9 15 –... -
Page 19: Before Using For The First Time
Before using for the first time Please adhere the extra data plate for Turning on the cooktop for the the appliance supplied with this doc‐ first time umentation in the space provided in Metal components are protected by a the "Technical service, data plate, conditioning agent. -
Page 20: Induction
Induction How it works When the appliance is turned on either inadvertently or by mistake, or An induction coil is located under each when there is residual heat present, cooking zone. When a zone is turned there is the risk of the metal items on, this coil creates a magnetic field heating up. -
Page 21: Noises
Induction Noises When you use an induction cooking zone, the following noises may occur, depending on the type and shape of the cookware bottom: On the higher power settings, it might buzz. This will decrease or cease alto‐ gether when the power setting is re‐ duced. -
Page 22: Cookware
Induction Cookware – Lift pans into position on the cook‐ top. Sliding them into place can Suitable cookware is made of: cause scuffs and scratches. – stainless steel with a magnetizable – Often the maximum diameter quoted bottom by manufacturers refers to the diam‐ eter of the top rim of the pot or pan. -
Page 23: Energy Saving Tips
Energy saving tips – Use a lid whenever possible to mini‐ mize heat loss. – For small quantities, select a small pan. A small pan on a small burner uses less energy than a large, only partially filled pan on a large burner. –... -
Page 24: Power Setting Ranges
Power setting ranges The cooktop is programmed with 9 power levels at the factory. If you wish to fine- tune a setting, you can extend the power setting range to 17 power levels (see "Programming"). Setting ranges Default Extended (9 power (17 power levels) levels) -
Page 25: Operation
Operation Basic operation Malfunction due to dirty and/or cov‐ ered sensor buttons The ceramic cooktop is equipped with The sensor buttons do not react or electronic sensor buttons that react to unintentional switching procedures finger contact. During activation, the result, perhaps even the automatic On/Off ... -
Page 26: Turning The Cooktop On
Operation Residual heat indicator Fire hazard! Do not leave the cooktop unattended When a cooking zone is hot, the residu‐ during operation! al heat indicator will light up after deac‐ Please note that the heat-up time for tivation. induction cooktops is shorter than The lines of the residual heat indicator for conventional cooktops. -
Page 27: Setting The Power Level - Expanded Setting Range
Operation Setting the power level - ex‐ PowerFlex cooking zone panded setting range You can combine the PowerFlex cook‐ ing zones into one large cooking area Tap the control scale between the (see the "Overview – Cooking zone" sensor buttons. chapter). -
Page 28: Auto Heat-Up
Operation Auto Heat-up Continued Auto Heat-up cooking level* time When Auto Heat-up has been activat‐ [min : sec] ed, the cooking zone turns on automat‐ ically at the highest level and then approx. 0 : 15 switches to the previously selected approx. -
Page 29: Twinbooster / Booster
Operation TwinBooster / Booster Two cooking zones are connected so the power for the booster can be ach‐ The cooking zones are equipped with a ieved. The connected zone will operate booster or TwinBooster (see "Overview at reduced power while the booster is –... - Page 30 Operation Activating the booster Turning the Booster/TwinBooster On/Off Briefly tap the selection button for the desired cooking zone. Briefly tap the selection button for the desired cooking zone. Select a power level if required. Tap the B I/II sensor button repeat‐ ...
-
Page 31: Keep Warm Function
Operation Keep warm function Setting the keep warm function Briefly tap the selection button for the The keep warm function is for keeping desired cooking zone. food warm that has just been cooked, Tap the control scale between the 0 i.e., food that is still hot. -
Page 32: Timer
Timer Changing the timer The cooktop has to be turned on if you wish to use the timer. Tap the sensor button. You can set a time up to 99 minutes. Set a new time, as described above. The timer can be used for two different Deleting the timer functions:... -
Page 33: Turning A Cooking Zone Off Automatically
Timer Turning a cooking zone off au‐ If you want to set another cooking zone to turn off automatically, follow tomatically the same steps as described above. You can set a time after which the cooking zone will turn off automatically. If more than one turn-off time is pro‐... -
Page 34: Using Both Timer Functions At The Same Time
Timer Using both timer functions at If you would like to call the other re‐ maining times so that they appear in the same time the display: The timer and automatic turn-off func‐ Tap the sensor button until: tions can be used at the same time. -
Page 35: Additional Functions
Additional functions Stop & Go function When activated, the Stop & Go reduces the power of all cooking zones in use to power level 1. The power levels of the zones and set‐ ting of the timer cannot be changed and the cooktop can only be turned off. -
Page 36: Safety Features
Safety features System lock / Safety lock The safety lock is activated when the cooktop is turned on. When the safety The system lock and safety lock are lock is activated, the cooktop can be deactivated if there is a power out‐ operated only under certain conditions: age. -
Page 37: Safety Shut-Off
Safety features Safety shut-off Safety shut-off with an overlong cooking time The safety shut-off is triggered auto‐ matically if a cooking zone is heated for an unusually long period of time. This time depends on the power level se‐ lected. If it has been exceeded, the cooking zone turns off and the residual heat indicator appears. -
Page 38: Overheat Protection
If, despite elimination of the cause, the Inductive coils overheat protection is triggered again, contact Miele Service. – Any booster function in operation will be turned off. – The power level that is set will be re‐... -
Page 39: Cleaning And Care
Cleaning and care Unsuitable cleaning agents Burn hazard! The burners must be turned off and To prevent damage to surfaces, avoid allowed to cool completely. the following while cleaning: – Liquid dish soap Risk of injury! – Cleaners containing soda, alkaline, The steam from a steam cleaner ammonia, thinners, or chlorides could reach electrical components... - Page 40 First wipe down the surface with a damp cloth to loosen soiling, then re‐ move stubborn crusting with a glass scraper. Clean the cooktop with the Miele ce‐ ramic and stainless steel cleaner (see "Optional accessories") or a commer‐ cial ceramic cleaner and paper towel or a clean cloth.
-
Page 41: Programming
Programming You can adapt the programming of the Starting the programming cooktop to your personal needs. Sever‐ function al settings can be changed in succes‐ When the cooking zone is turned sion. off, tap the and sensor buttons After the programming function is start‐... - Page 42 Programming Settings Program Status Demo mode and default set‐ Demo mode on tings Demo mode off Default settings reinstated Stop & Go Number of power levels 9 power levels 17 power levels Induction buzzer tone when there is no or unsuitable cook‐ Quiet ware.
- Page 43 Programming Settings Program Status Not currently available Con@ctivity - only on communication-ena‐ Logged off bled appliances retrofitted with a wireless stick - Logged on Buzzer tone if the sensors are covered Sensor button reaction speed Slow Normal Fast Unlisted programs are not assigned. The default setting is shown in bold.
-
Page 44: Frequently Asked Questions
Risk of injury! Improperly performed installation, maintenance or repair work can pose a serious danger to users of the appliance. Installation, maintenance and repairs may only be carried out by Miele author‐ ized technicians. Do not attempt to open the cooktop casing yourself. - Page 45 Frequently asked questions Problem Possible cause and solution After the cooktop is ac‐ The system lock or safety lock is activated. tivated, appears in Deactivate the system lock or safety lock (see the timer display for "System lock / Safety lock"). several seconds.
- Page 46 Take any pans off the cooktop and wipe away any food deposits. Interrupt the power supply to the cooktop for ap‐ prox. 1 minute. If the problem persists after power is restored, please contact Miele Service.
- Page 47 Make sure it has not been blocked by something like a fork. Remove the cause of the blockage. If this fault message continues to appear in the display, contact Miele Service. and other numbers There is a fault in the electronic module.
-
Page 48: Con@Ctivity
Con@ctivity Your cooktop is communication ena‐ Conclude the log-on on the hood/ bled and can communicate with the display devices (see the correspond‐ ventilation hood using the wireless USB ing instructions). stick included with selected ventilation Logging off the cooktop hoods (Con@ctivity). -
Page 49: Important Safety Instructions - Installation
IMPORTANT SAFETY INSTRUCTIONS - INSTALLATION After the installation of the Installation and connection of cooktop, the electrical cord may the cooktop to the electrical power supply may only be performed by a not come into contact with any qualified electrician. -
Page 50: Safety Clearances
Safety clearances Safety clearance above the cooktop For a ventilation hood above the cook‐ top, always use the clearance specified by the hood manufacturer. If there are no specifications from the hood manu‐ facturer or if flammable materials (e.g. a utensil rail) are installed above the cooktop, the clearance must be at least 30"... - Page 51 Safety clearances Safety clearances to the sides and back of the cooktop In installing a cooktop there may be an optionally high cabinet or room wall against the rear side and one of the sides (right or left) (see illustrations). ...
- Page 52 Safety clearances Minimum clearance under‐ Protective base neath the cooktop Installation of a protective base under the cooktop is allowed but not required. To ensure proper ventilation of the cooktop, a minimum clearance is re‐ A gap of 3" (75 mm) at the back is re‐ quired between the appliance and an quired for the power supply cord.
- Page 53 Safety clearances Safety distance from the wall covering If a wall covering is installed, a minimum safety distance must be maintained be‐ tween the countertop cut-out and the covering, since high temperatures can dam‐ age these materials. If the covering is made of a combustible material (such as wood), the distance be‐ tween the countertop cut-out and the wall covering must be a minimum of 2"...
-
Page 54: Ventilation
Ventilation a Front b Ventilation cut-out in the rear wall of the cabinetry 19" x 3" (482 x 75 mm) (Slight) ventilation also takes place when the cabinet is directly against the wall. c Protective base The installation of a protective base beneath the cooktop is not required, but permitted. -
Page 55: Instructions For Installation
Instructions for installation Seal between cooktop and Tiled countertop counter The grouting and shaded area under the appliance frame must be flat and even so that the frame will lie evenly In case a disassembly is required, and the sealing strip under the edge of the appliance must not be perma‐... -
Page 56: Installation Dimensions
Installation dimensions a Front b Installation height c Flexible metal hose with power cord, L = 3' 11¹/₄" (1200 mm) d Data plate... -
Page 57: Installation
Installation Preparing the counter Installing the cooktop Create the counter cut-out as shown Feed the appliance power cord down in the cooktop diagram and in the de‐ through the counter cut-out. tailed drawing. Remember to main‐ Center the cooktop in the cut-out. tain a minimum safety distance (see Make sure that the seal under the "Safety clearances"). -
Page 58: Electrical Connection
Miele-authorized service technician. Work by unquali‐ Installer: fied persons can cause considerable danger to users. Miele cannot be Please leave these instructions with held liable for any damage arising as the customer. a result of such work. - Page 59 Electrical connection Connection Make sure that the connecting socket is accessible after the installation of the Ensure that the connection data on cooktop. the data plate (voltage, frequency, Further information can be found on the and fuse rating) match those of your included data plate.
-
Page 60: Caring For The Environment
Caring for the environment Disposal of the packing mate‐ Disposal of your old appliance rial Old electrical and electronic appliances often still contain valuable materials. The cardboard box and packing materi‐ However, they also contain harmful als protect the appliance during ship‐ substances that were essential for the ping. -
Page 61: Technical Service, Data Plate, Warranty
In the event of a fault which you cannot easily correct yourself, please contact: – your Miele dealer, or – the Miele Technical Service Department. See back cover for contact details. Please quote the model and serial number of your appliance when contacting Miele. -
Page 62: Mielecare
Contract in the industry that guarantees repairs by a Miele Authorized Service Provider using genuine Miele parts. On‐ ly genuine Miele parts installed by fac‐ tory trained professionals can guaran‐ tee the safety, reliability, and longevity of your Miele appliance. - Page 63 Technical Service. U.S.A. Canada Miele, Inc. Importer Miele Limited National Headquarters 9 Independence Way Headquarters and Miele Centre Princeton, NJ 08540 161 Four Valley Drive Phone: 800-843-7231 Vaughan, ON L4K 4V8 609-419-4298 Fax: www.miele.ca www.mieleusa.com...
- Page 64 KM 6320 en-US M.-Nr. 09 888 600 / 01...