Auto Heat-Up - Miele KM 6629 Operating And Installation Instructions

Auto heat-up

When Auto heat-up has been activated,
the cooking zone switches on
automatically at the highest setting and
then switches to the continued cooking
setting which you have previously
selected. The heat-up time depends on
which continued cooking setting has
been chosen (see chart).
Activating
 Touch the sensor for the continued
cooking setting you want until a tone
sounds and the sensor starts to
pulsate.
During the heat-up time (see chart), the
continued cooking level set will pulsate.
With extended power levels (see
"Programming"), and a selected interim
power level the sensors for the power
levels in front of and after the interim
power level will pulsate if an extended
power level setting has been selected.
Changing the continued cooking
setting while the cooking zone is
heating up deactivates Auto heat-up.
Deactivating
 Touch the sensor for the continued
cooking setting,
or
 Select a different power setting.
Continued
cooking setting*
1
1.
2
2.
3
3.
4
4.
5
5.
6
6.
7
7.
8
8.
9
* The continued cooking settings with a dot
after the number are only available if the
power level range has been extended (see
"Programming").
Operation
Heat-up time
[min:sec]
Approx. 0:15
Approx. 0:15
Approx. 0:15
Approx. 0:15
Approx. 0:25
Approx. 0:25
Approx. 0:50
Approx. 0:50
Approx. 2:00
Approx. 5:50
Approx. 5:50
Approx. 2:50
Approx. 2:50
Approx. 2:50
Approx. 2:50
Approx. 2:50
–
35