Miele KM 6629 Operating And Installation Instructions page 70

Flush-fitted cooktops
Preparing the worktop
 Make the worktop cut-out as shown
in "Building-in dimensions". Observe
the safety distances (see "Safety
distances").
 Solid wood, tiled and glass worktops:
Fix the wooden frame  7 mm below
the top edge of the worktop (see
diagram).
Connecting the mains connection
cable to the appliance
The mains connection cable must be
connected by a suitably qualified and
competent electrician in accordance
with current local and national safety
regulations.
 Follow the instructions in the wiring
diagram (see "Electrical connection -
Wiring diagram").
Installing the cooktop
 Feed the mains connection cable
down through the cut-out.
 Centre the cooktop in the cut-out.
 Connect the cooktop to the mains
electricity supply.
 Check that the cooktop works.
 Seal the remaining gap  with a
silicone sealant that is heat-resistant
to at least 160 °C.
For natural stone worktops and
natural stone tiles, only use silicone
sealant that is specially formulated
for natural stone, and observe the
sealant manufacturer's instructions.
70