Additional Functions; Stop & Go; Recall - Miele KM 7678-2 FL Operating And Installation Instructions

Additional functions

Stop & Go
When Stop & Go is activated, all power
levels are reduced to 1.
The power levels and the timer settings
cannot be altered; the cooktop can only
be switched off. The minute minder,
automatic switch-off, Booster and Auto
heat-up times continue to run.
When the function is deactivated, the
appliance switches back to the power
level that was set last.
If the function is not deactivated within
1 hour, the cooktop will switch off.
Activating/Deactivating
 Touch the  sensor.
Use this function if there is a danger of
food boiling over.
40

Recall

If the cooktop is switched off
inadvertently during operation, this
function can be used to reset all
settings. For this to work, the cooktop
must be switched on again within
10 seconds of being switched off.
 Switch the cooktop on again.
The previously set power levels flash.
 Press one of the flashing power level
indicators immediately.
All settings are restored.