Additional Functions; Stop & Go; Recall - Miele KM 7999 FR Operating And Installation Instructions

Additional functions

Stop & Go
This function can only be used when
the Manual 1–9 function is being used
for all pans. When Stop & Go is
activated, all power levels are reduced
to 1.
The power levels for the cooking areas
and the timer settings cannot be
altered; the cooktop can only be
switched off. The minute minder time,
switch-off times and Booster durations
are all halted.
When the function is deactivated, the
appliance switches back to the power
level that was set last and the times will
continue to run.
Activating/Deactivating
If the function is not deactivated within
30 minutes, the cooktop will switch
off.
 Open the pull-down menu.
 Touch the  symbol for approx.
1 second.
52

Recall

If the cooktop is switched off
inadvertently during operation, this
function can be used to reset all
settings. For this to work, the cooktop
must be switched on again within
10 seconds of being switched off.
 Switch the cooktop on again.
 Select
.
Yes
All the power levels and the times will
continue to operate using the settings
selected previously.