System; Date & Time - Gira G1 Assembly And Operating Instructions Manual

Configuring the Gira HomeServer Client/eNet Client
11.6

System

PIN protection
You can add PIN protection for the settings in the settings menu. This protects
the Gira G1 against unwanted changes. To activate PIN protection, proceed as
follows:
1 Tap the [PIN protection] button.
F The [PIN protection] page opens.
2 Slide the "Activate PIN protection" switch to the right.
3 Enter a PIN in the upper box and repeat it in the second box.
4 Confirm the entry with [OK].
F The settings menu of the Gira G1 can now only be opened after the PIN is en-
tered.
Note on PIN protection
In order for the PIN protection to be active, you must close the settings menu via
the Task list, both after the initial input and after each further use (following ac-
tivation via the PIN).
To do so, tap the square in the footer and slide the window with the settings
menu to the side.
11.6.1
Date & Time
Here you can set the time zone.
Gira G1
Figure 100
PIN protection
99