Gira G1 Assembly And Operating Instructions Manual page 18

Gira G1 (KNX) settings
The following image shows the menu structure of the [Settings] view:
System menu
Select direct function [see 3.1.1]
System [see 3.1.2]
Date/time [see 3.1.2.1]
Configure WLAN* [see 3.1.2.2]
Configure network [see 3.1.2.3]
Network connection type [see 3.1.2.4]
Set proximity sensor [see 3.1.2.5]
Reliable KNX communication [see 3.1.2.6]
Start KNX programming mode [see 3.1.2]
Calibrate sensor** [see 3.1.2.7]
Factory reset [see 3.1.2]
Restart [see 3.1.2]
PIN protection [see 3.1.3]
View configuration [see 3.1.4]
Select Home [see 3.1.4.2]
Define favourites [see 3.1.4.2]
Sort functions [see 3.1.4.3]
Restore defaults [see 3.1.4.4]
Door communication
Forwarding*** [see 16.6.1]
Call door station*** [see 16.6.2]
Internal call*** [see 16.6.3]
Camera selection*** [see 16.6.4]
Ringtone melody*** [see 16.6.5]
Access data [see 15.2.1]
Automatic door opener*** [see 16.6.6]
Voice volume*** [see 16.6.8]
Ring tone volume*** [see 16.6.9]
Weather stations
Select weather station [see 17.1.1]
Information
License agreements
Gira app version [see 3.2.1]
* only displayed if WLAN is selected as the connection type
** only displayed if the ETS parameter "internal sensor" was activated
*** only displayed after successful connection to the DCS-IP gateway
Gira G1
Figure 8
Menu structure
[Settings]
18