System And Applications - Gira G1 Assembly And Operating Instructions Manual

Configuring the Gira G1
1.2

System and applications

The Gira G1 can be run in several systems. As of version 3.0, the firmware pro-
vides all of the necessary content. You can set the desired operating mode dur-
ing commissioning. The options are set out below.
- KNX system
In this mode, the Gira G1 is used as a KNX device. Configuration is performed
via the ETS.
Please note that the "Door communication" and "Weather forecast" applica-
tions must be enabled in the ETS.
For more information on commissioning as a KNX device, [see 2].
- Gira X1 and security system
In this mode, the Gira G1 is used as a Client for the Gira X1 or the Gira Alarm
Connect security system. The corresponding devices (Gira X1 and Gira Alarm
Connect security system) are configured via the Gira Project Assistant.
You can activate the "Door communication" and "Weather forecast" applica-
tions in the Gira G1's commissioning assistant.
For more information on commissioning as a Client for the Gira X1 or the Gira
Alarm Connect security system, [see 5].
- Gira HomeServer/eNet Server
In this mode, the Gira G1 is used as a Client for the Gira HomeServer or the
Gira eNet server. See the respective apps for set-up of Clients. You can also
activate the "Door communication" and "Weather forecast" applications in
the app settings.
For information on commissioning the HomeServer Client, [see 12].
For information on commissioning the eNet Client, [see 14].
- Only use applications
If you wish to use the Gira G1 exclusively as a home station for the Gira door
communication system and weather forecast, you can select the option "On-
ly use applications". You set up the two applications on the Gira G1.
For information on setting up the door communication system, [see 15].
For information on setting up the weather forecast, [see 17].
Gira G1 7