Configure Favourites - Gira G1 Assembly And Operating Instructions Manual

Operating the Gira HomeServer app
13.3.3

Configure favourites

You can store the functions most frequently used in the favourites list. Using the
function "Configure favourites", you can edit or transfer functions from the
menu to the favourites list.
If you wish to add functions to the favourites list, please proceed as follows:
1 Tap [Configure favourites].
F Favourites configuration mode is active (recognizable by green tool symbol
in the title bar).
2 Select the functions which should be added to the favourites:
For this, tap [Menu], select a desired function, and give it the name with
which it should be displayed in the favourites overview.
3 Confirm with [OK] to add the function to the favourites list.
4 After selecting all the functions you require, exit Favourites mode in the sys-
tem menu with [Exit favourites configuration].
F Your favourites can now be accessed via the [Favourites] menu item on the
lower edge of the screen.
If you wish to edit the favourites list, please proceed as follows:
1 Tap [Configure favourites].
F Favourites configuration mode is active (recognizable by green tool symbol
in the title bar).
2 Tap [Favourites] to open the list of favourites.
3 Tap the function in the list which you wish to change.
4 A dialog opens where you can select the action which you wish to perform
for this function.
5 Repeat the last two work steps until you have performed all the changes in
the favourites list.
6 After performing all the changes, exit Favourites mode in the system menu
with [Exit favourites configuration].
Gira G1
Figure 107
Configure favourites
Add functions
Edit favourites
108