Operating the Gira G1 (KNX)
4.10.1
Creating a switching time
•
1 Tap the [Timer] button in the detail view of the relevant function.
F The [Timer overview] page opens.
2 Tap the [+] button.
F The [Timer] page opens.
3 You can activate or deactivate the days on which the timer is to apply with a
finger tap. Days on which the timer is active are marked green.
4 Enter the time at which the action is to be carried out.
5 Under "Select action", choose the function to be set up. The type of value that
can be selected here depends on the function to be set up.
6 Tap the [OK] button.
F The timer is set.
Gira G1
Figure 32
Overview
Timer
Figure 33
Creating a switching
time
41