Network Connection Type; Set Proximity Sensor - Gira G1 Assembly And Operating Instructions Manual

Gira X1 Client settings
6.1.2.6

Network connection type

Specify here if you want to connect the Gira G1 to the network via LAN or
WLAN.
1 Select the desired connection type (LAN or WLAN) and confirm with [OK].
F The Gira G1 restarts and the network connection type is set.
6.1.2.7

Set proximity sensor

Here you can set the distance at which the Gira G1 is activated from sleep mode
when a hand approaches.
1 Tap the [Set proximity sensor] button.
F The [Set proximity sensor] page opens.
2 Choose between the settings of the proximity sensor:
- off (the proximity sensor is deactivated, i.e., the interface must be tapped to
switch on the Gira G1),
- close (the sensor reacts at a short distance),
- medium (the sensor reacts at a medium distance),
- wide (the sensor reacts at a long distance).
3 Tap the [OK] button.
F The proximity sensor has been set. The system menu opens.
Gira G1
Figure 46
Network
connection type
Figure 47
Set proximity sensor
53