Navigation Bar - Gira G1 Assembly And Operating Instructions Manual

Configuring the Gira HomeServer Client/eNet Client
F The start page will now also show the apps that you activated in the settings.
8 Now tap the desired app and commission it:
Configuring the HomeServer Client [see 12].
Configuring the eNet Client [see 14].
Configuring the door communication system [see 15].
Configuring the weather forecast [see 17].
If you activate the "Select as main application" setting for an app, the Gira G1
displays this app when you reactivate it from idle state. You can only use this
option for one app. If this option is not activated, the Gira G1 always launches
with the last app to be open.
11.2

Navigation bar

The navigation bar is located in the lower part of the screen.
The three buttons have the following functions:
The back button takes you back a step every time it is tapped.
The Home button opens the start screen.
The Task button displays all active apps.
You can close the apps by swiping sideways.
Note
Showing the navigation bar
The navigation bar is hidden in the "Door communication" and "Weather" appli-
cations. You can show the navigation bar again by swiping upwards from the
bottom edge of the screen.
Gira G1
Figure 94
Start page
Select as main appli-
cation
92