System Menu; Select Direct Function - Gira G1 Assembly And Operating Instructions Manual

Gira G1 (KNX) settings
3.1

System menu

The following functions are available in the system menu:
- Select direct function [see 3.1.1]
- System [see 3.1.2]
- PIN protection [see 3.1.3]
- View configuration [see 3.1.4]
3.1.1

Select direct function

The direct function is a function that can be operated from any view by placing
the palm of the hand on the screen. The "Switching (button function)" and
"Scene auxiliary unit" functions can be configured as the direct function. For this
it is recommendable to choose one of the room's main functions, e.g switching
the ceiling light.
1 Tap the [Select direct function] button in the system menu.
F The [Select direct function] page opens.
2 Activate the [Activate direct function] switch.
F A selection field appears behind the listed functions. The activated function
is indicated by a dot in the selection field.
3 Activate the selection field behind the function that you have chosen as the
direct function.
4 Tap the [OK] button.
F The data is saved. The system menu opens.
Gira G1
Figure 9
Select direct function
19