System Menu; Selecting Direct Function - Gira G1 Installation And Operating Instructions For The Installer

Settings
4.1

System menu

The System menu provides you with the following functions:
- Selecting direct function [see 4.1.1]
- System [see 4.1.2]
- View configuration [see 4.1.3]
4.1.1

Selecting direct function

The direct function is the function that you can operate from any view by placing
your whole hand. The "Switching (momentary contact function)" and "Scene
extension unit" functions can be used for the direct function. It is also possible
to select a main function of the room such as switching on the ceiling light.
1 Touch the [Select direct function] button in the System menu.
? The [Select direct function] page is opened.
2 Activate the [Activate direct function] switch.
? A selection box appears after the listed functions. The activated function is
selected using a dot in the selection box.
3 Activate the selection box after the function that should be used as the direct
function.
4 Touch the [OK] button.
The data is saved. The system menu is opened.
?
Gira G1 installation and operating instructions
0.258 21/2015
Figure 10
Selecting direct
function
13