20. In the IP Setup section, enter the IP Address 192.168.10.50 and Netmask 255.255.255.0.
Then click Save. In the menu located at the top, you will be prompted to reboot the device.
Click the Reboot button and in the following page, click Reboot. When prompted to change
settings, click Yes to reboot the device and apply the changes.
Note: When configuring TEW-740APBO #2, enter the IP address settings 192.168.10.51 and
Netmask 255.255.255.0.
21. Click on the Wireless tab and select Radio 0 Basic Setup. Make sure Channel 1 is
selected and click Save.
Note: When configuring TEW-740APBO #2, the wireless channel must be the same as
TEW-740APBO #1.
Radio 0 Basic Setup
9
Wireless